Resolution Number 72-8-28-6355
RESOLUTION NO. 72-8-28-6
(AMENDED)
A RESOLUTION OF THE CITY COUNCIL OF THE CITY OF
SAN JUAN CAPISTRANO DETERMINING THAT RECREATIONAL
VEHICLE PARKS ARE USES PERMITTED CONDITIONALLY IN
THE C -2A (RESTRICTED GENERAL BUSINESS) DISTRICT.
WHEREAS, Swan Constructors, Inc., has heretofore made
application to the Planning Commission of the City of San Juan Capistrano
for a determination that recreational vehicle parks are uses similar to
those permitted by Section 4.18 of Ordinance No. 115; and
WHEREAS, the aforesaid Planning Commission, has, by its
Resolution (No. 72 -8 -15 -2 -PC), found that recreational vehicle parks
are not compatible with or similar to the permitted or conditionally per-
mitted uses set forth in said Ordinance; and
WHEREAS, this City Council having heard testimony and
reviewed the evidence and considered the facts, does find that the afore-
said proposed use is similar to those permitted under Section 4.18 of
Ordinance No. 115,
NOW, THEREFORE, BE IT RESOLVED by the City Council of the
City of San Juan Capistrano, that it is the finding and determination of
this City Council that recreational vehicle parks are uses which are
similar in character to those uses set forth in the C -2A Restricted
Business District and may be conditionally permitted therein.
PASSED, APPROVED AND ADOPTED this 11th day of September,
1972, by the following vote, to wit:
AYES: COUNCILMEN: BYRNES, CHERMAK, GAMMELL, THORPE,
WEATHERS
NOES: COUNCILMEN: NONE
ABSENT: COUNCILMEN: NONE
J
es F. Thorpe, Mayor of the
Ci y of San Juan Capistrano
ATTEST:
City Clerk
STATE OF CALIFORNIA )
COUNTY OF ORANGE ) ss.
CITY OF SAN JUAN CAPISTRANO )
I, WANDA E. ANDERSEN, City Clerk of the City of San Juan
Capistrano, hereby certify that the foregoing is a true and correct copy
of Resolution No. 72-8-28-6, as amended, and adopted by the Council on
September 11, 1972.
City Clerk
PVC SEWER SHORT FORM SPECIFICATION
SCOPE
This specification designates general requirements for unplasticized
chloride (PVC) plastic gravity sewer pipe with integral wall bell and
spigot joints for the conveyance of domestic sewage.
MATERIALS
All material must meet ASTM D-3034-72 with the following exceptions:
A. All pipe and fittings shall be extra strength and have
rubber ring bell and spigot joints. The bell shall
Consist of an integral wall section stiffened with two
PVC retainer rings which securely lock the solid cross
section rubber ring into position.
B. The minimum wall thickness shall be
Diameter 4" V e^ 10^ 12"
Wall Thickness .125 .180 .240 .300 .360
and provide a minimum SDR ratio.of 35.
PIPE
All pipe shall be suitable for use as a gravity sewer conduit. Provisions
must be made for contraction and expansion at each joint with a rubber ring.
The bell shall consist of an integral wall section stiffened with two PVC
retainer rings which securely lock the solid cross section rubber ring into
position. Sizes and dimensions shall be as shown in table shown in this
specification. Standard lengths shall be 20 ft. and 12.5ft + 1 inch.
FITTINGS
All fittings and accessories shall be as manufactured and furnished by the
pipe supplier or approved equal and have bell and/or spigot configurations
identical to that of the pipe. . .
PHYSICAL AND CHEMICAL REQUIREMENTS
Pipe shall be designed to pass all tests at 730 F (+ 30F)
PIPE STIFFNESS
Minimum "pipe stiffness" (F/A y) at 5% deflection shall be 46 for all sizes
when tested in accordance with ASTM Designation D2412, External Loading
Properties of Plastic Pipe by Parallel -Plate Loading.