Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
SR#536731 - 33012 CALLE AVIADOR
PROJECT: SITE ONE LANDSCAPE 33012 CALLE AVIADOR SAN JUAN CAPISTRANO, CA 92675 CONTRACTOR: AMERICAN ALARM SYSTEMS 1101 S GRAND AVE. STE. G SANTA ANA, CA 92705 P: 714-863-0129 LICENSE# 299406 REQUIREMENTS: SYSTEM IS REQUIRED BY CALIFORNIA BUILDING CODE/FIRE CODE. ADA COMPLIANCE: NONE APPLICABLE. SCOPE OF WORK: SCOPE OF WORK IS UPGRADE OF AN EXISTING SPRINKLER MONITORING SYSTEM WITH A CELLULAR COMMUNICATOR, NEW FACU, SMOKE DETECTOR, AND ANNUNCIATOR FOR AN EXISTING B OCCUPANCY BUILDING. AUX. FEATURES: NONE APPLICABLE. EQUIPMENT: DMP XR150FC, FIRE ALARM CONTROL PANEL, CSFM# 7165-1157:0135 DMP 263LTE-A, CELLULAR COMMUNICATOR, CSFM# 7165-1157:0135 DMP 630F, ANNUNCIATOR, CSFM# 7165-1157:0135 DMP 2W-BLX, SMOKE DETECTOR, CSFM# 7272-1157:0137 DMP 711S, ZONE EXPANDER MODULE, CSFM# 7165-1157:0135 SPACE AGE ACE-11, DOCUMENT BOX, CSFM# 7300-0553:0110 CONTENTS: TITLE PAGE (THIS PAGE) MANUFACTURER DATA SHEETS CSFM LISTING SHEETS XR150FC/XR550FC FACP ▸Up to 562 two-wire smoke detector or fire initiating zones on XR550FC ▸Up to 142 two-wire smoke detector or fire initiating zones on XR150FC ▸Up to .5 Amps 12 VDC smoke and auxiliary output with OVC protection ▸Up to 506 fully programmable Form C relays ▸Serial 3 Digital Dialer or CID reporting to multiple receivers ▸Eight communication paths between the panel and monitoring center ▸Built-in remote or on-site firmware upgrade capability ▸12,000 event buffer ▸French, Spanish and English menus available ▸Multiple onboard status LEDs ▸Up to 100 output schedules to control relays and panel outputs ▸32 individual reporting areas with common areas ▸Built-in 32-character LED annunciator on panel door ▸Output groups deliver maximum functionality with easy programming Onboard Network ▸Onboard 10/100 autosensing Ethernet ▸Customizable check-in time and retry time ▸Suitable for multi-site applications ▸Meets UL 864 9th Edition requirements ▸Powerful addressable fire alarm control panel (FACP) ▸Proven reliability suitable for commercial and industrial installations ▸Full range of zone expansion, communication and relay output capability ▸Flash updatable — locally over cell or network ▸Onboard digital dialer, network communicator or optional cellular communicator ▸Up to .7 Amps 12 VDC supervised bell output FEATURES XR150FC AND XR550FC FIRE PANELS The XR150FC and XR550FC provide basic fire monitoring for any single site application. The XR150DNFC and XR550DNFC panels provide basic fire monitoring and are enhanced by the onboard Ethernet connection that allows the use of Network Monitoring™. Both panels come fully assembled from the factory with the following components. Control Panel The XR150FC and XR550FC Series addressable fire panels provide complete system control for local NAC operation. Additionally, DACT, NET or Cell communication to the monitoring center are provided. The microprocessor- based panel also provides input for Class A zone expansion, conventional and addressable smoke detectors, pull stations and heat detectors. Keypad Annunciator The Fire Command Center mounted in the door offers a 32-character full text LCD readout that displays system events and menu prompts, making it efficient and easy to use. Transformer and Enclosure The 16 VAC, 56 VA wire-in transformer is factory installed and features a built-in PTC for power circuit protection. FLEXIBLE COMMUNICATION The XR150/XR550 commercial fire panels have transitioned from dialer-focused communications to a true network and cellular communications approach, providing stronger, multi-layered panel communications that ensure a constant link between the panel and monitoring center. The unique DMP Serial 3 format supports 16 or 32-character users, zone and area names to decrease response time and limit dependence on automation literal tables for message conversion. 271 GROUND FAULT MODULE Fitting securely inside the panel enclosure, the module connects to a supervisory zone and the earth ground. If a ground fault is detected, the module trips a relay. The panel will enter into a trouble condition and annunciate at the keypad. In addition, ground fault condition on the zone will light the corresponding GND FAULT red LED. Model 271 can be ordered separately for ground fault detection to existing fire systems. REMOTE ANNUNCIATOR Install model 630F Remote Annunciators to meet the requirements of virtually any installation. NETWORK OR CELLULAR COMMUNICATION Built-in 10/100 auto-sensing Ethernet connection enhances both standard and encrypted line security options. Both UDP and TCP are supported. The network option can be used as the primary or backup path to the digital dialer or cellular option. The XR150FC and XR550FC panels may be used with the 263 Series Cellular Communicators as the primary path (no backup required) for commercial fire installations. The check-in and fail time settings are programmed for five minutes. As the backup path, the 263 communicator provides the security of a communication link that continues to function, even when landlines are cut or compromised. The communicators can be used as a stand- alone communicator without the need for a backup. This interface works over a variety of carriers in the USA and Canada. EIGHT COMMUNICATION PATHS Configure up to eight communication paths between the panel and monitoring center. Each path has its own panel communication programming parameters and can be identified as either primary or backup. This enables installers to configure a reliable communication link, offering greater confidence that the panel will always be connected to the monitoring center. COMMUNICATION FUNCTION DIAGNOSTICS The enhanced diagnostic menu enables technicians to check network and cellular communication status, cell signal strength and email status from the keypad. 12,000 EVENT MEMORY Allows the user to view the last 10,000 door accesses or 2,000 system events that occurred over the past 45 days. FIRE ZONE PROGRAMMING Program zones for fire, fire verify, fire retard, presignal, cross zoning or fire supervisory. This flexibility allows the ability to match individual zone characteristics to the needs of any area in the fire installation. ZONE EXPANSION The XR150FC and XR550FC provide up to 574 zones, programmable for a variety of fire applications. The system provides Class B 12 VDC powered zones, two onboard and four on the 715 expansion module, plus eight panel burglary zones. Up to 64 zones are available on 16 keypad addresses, and up to 100 zones are available on each built-in LX-Bus™ using expansion modules. FIRE VERIFY This is used primarily for smoke detector circuits to verify the existence of an actual fire condition. When a Fire Verify zone initiates an alarm, the panel performs a Sensor Reset. If any Fire Verify zone initiates an alarm within 120 seconds after the reset, an alarm is indicated. If an alarm is initiated after another 120 seconds, the cycle is repeated. NOTIFICATION CIRCUIT EXPANSION Easily add NAC outputs to the XR150FC/ XR550FC system. Up to three Class B modules can be mounted within the FACP. Model 865 or 866 Class B NAC Modules may be combined with a power supply to provide additional 4 Amp NAC outputs. Use an 867 on the SLC Loop to further expand NAC circuits. FIRE DRILL AND WALK TEST Users can test fire notification bells using the Fire Drill feature. A special code is also available for installers to test the system. The Walk Test allows a single technician to check the panel response to fire, burglary, panic and supervisory zones. BUILT-IN PROGRAMMER AND DIAGNOSTICS No programming device is required, enabling installers and service technicians to fully program the system and run diagnostics from any DMP LCD keypad. Check the electrical state of zones, find individual zone numbers, check the LX-Bus for missing, overlapping and/or extra zones and much more, all from any DMP LCD keypad. FLASH UPDATABLE The XR150FC and XR550FC panels accept software updates using Dealer Admin™. This makes it easy to perform the flash update remotely any time new panel feature updates release. 2W-BLXSystem Sensor Smoke Detector FIRE PANELS OUTPUTS The XR150FC and XR550FC allow the use of two SPDT relay outputs and four open collector outputs, which may be activated by zone or system events, by schedule, through the User Menu or when a card is presented. Output Groups allow multiple outputs to activate with a single event and/or can be assigned to a particular user profile. OUTPUT SCHEDULES Achieve maximum system flexibility with 100 programmable schedules that simplify planning and operations. Control any contact-activated device with schedules that automatically regulate relays and switched-ground outputs. STATUS LIST To provide maximum system flexibility, fire zones may be programmed to display at a specific keypad. In this manner, all fire zones can be monitored in one location, and other zones can be programmed to display and be monitored at different keypad locations. COMMERCIAL WIRELESS FIRE DEVICES The list of DMP wireless devices that have earned the UL Commercial Fire Listing include: 1103 Universal Transmitter: Two-input transmitter typically used in commercial burglary door or window applications. 1100R Wireless Repeater: Extends the communication range of DMP receivers, enabling physically larger, more reliable wireless security systems. 1100T Wireless Translator: Supports up to 128 zones of DSC, Honeywell 5800, 2GIG Series or Interlogic wireless. 1100X Wireless Receiver: Supports up to 500 transmitters and satisfies all wireless applications. 1100XH High Power Wireless Receiver: Provides additional transmit and receive amplification for improved performance at greater distance or in harsh building environments. Commercial Smoke Detectors: The 1164 includes synchronized sounders and a tamper switch. The 1164NS is for applications with existing sounder/ notification devices. 1168 Wireless Smoke/CO/Low Temp Detector: The 1168 Wireless combination detector features multi-criteria smoke sensing using a combination of photoelectric heat, IR flame flicker, carbon monoxide (CO) indicators, and a low temp sensor. The 1168 reports carbon monoxide, fire alarms, and low temp to the control panel. 1183 Wireless Heat Detector: A reliable, ceiling-mount heat sensor available in two versions. The 1183-135F responds if the temperature exceeds 135°. The 1183-135R adds a rate-of-rise feature that responds if the temperature increases by 15°F per minute or more. 1184 Carbon Monoxide Detector: The ideal choice for difficult-to- wire locations, applications where room aesthetics are critical or where hazardous materials are present. The sensor provides an early alert of potentially harmful levels of carbon monoxide in residential or commercial installations. In addition, it also transmits trouble, tamper and low-battery messages to the panel. © 2023 Digital Monitoring Products, Inc. | LT-1317 | 23471 800-641-4282 | DMP.com 2500 N. Partnership Blvd, Springfield, MO 65803 Designed, engineered & manufactured in Springfield, MO using U.S. & global components. FIRE PANELS System Specifications Primary Power (included): 16 VAC 56 VA transformer Secondary Power: 12 VDC Battery Models: 365, 366, 368 or 369 Output Rating: Bell Up to .7 Amps at 12 VDC Smoke and Auxiliary Up to .5 Amps at 12 VDC For installations, total bell, smoke and auxiliary cannot exceed 1.2 Amps using a 56 VA transformer. Current Draw: 174 mA Standby 217 mA Alarm Enclosure: Material Cold-rolled steel (Red) Ordering Information XR150DNFC-R XR150 Fire Control Panel with Network XR550DNFC-R XR550 Fire Control Panel with Network Certifications California State Fire Marshal (CSFM) New York FDNY Refer to the XR150FC/XR550FC Compliance Guide (LT-1330) and specific compliance listings for installation and programming requirements necessary to meet a particular approval. FCC Part 68 FCC Part 15 Underwriters Laboratories (UL) Listed ANSI/UL 864 Fire Protective Signaling For additional information, go to DMP.com/Compliance. Keypads 630F LCD Remote Fire Command Expansion Modules 710 Bus Splitter/Repeater 711 Single Zone Expansion 711S Zone Expansion Module 714 Four-Zone Class Expansion 714-8 Eight-Zone Class-B Expansion 714-16 16-Zone Class-B Expansion 715 Four-Zone Two-Wire Smoke Expansion 715-8 Eight-Zone Two-Wire Smoke Expansion 715-16 16-Zone Two-Wire Smoke Expansion 716 Output Expansion, Four Form C relays, Four Open Collector Outputs Cellular Communicators 263LTE-V/381-2 LTE Communicator for Verizon 263LTE-A/381-2 LTE Communicator for AT&T 263LTE-FN/381-2 LTE Communicator for FirstNet Auxiliary Modules 860 Relay Output Module 865 Style W/X Notification Circuit Module 866 Style W Notification Circuit Module 867 LX-Bus Notification Circuit Module 869 Style D Class A Initiating Circuit Module 893A Dual Phone Line Module Power Supplies 505-12/LX 5 Amps @ 12 VDC 505-12L 5 Amps @ 12 VDC 505-12A 5 Amps @ 12 VDC Pull Stations 850S Manual Pull Station Single Action 850D Manual Pull Station Dual Action 850S/711 Single Action Pull Station with Zone Expander 850D/711 Dual Action Pull Station with Zone Expander 850S/711S Single Action Pull Station with Zone Expander 850D/711S Dual Action Pull Station with Zone Expander Smoke/Heat Detectors 2W-BLX Conventional Smoke 2WT-BLX Conventional Smoke/Heat Accessories 270 Network Transient Suppressor 271 Ground Fault Detection Module 277 Commercial Fire Buzzer Module 300 Four-Wire Harness 303 Silence/Reset Push Button 305 Plug-in Output Relay 306 Tamper Harness 307-S Screw-On Tamper Switch 3012 Clip-On Tamper Switch 335 Intrusion Siren 370 Lightning Suppressor 374 Surge Voltage Suppressor 381-2 18" Coax Extension 431 Output Harness 861 Power Distribution Module Monitoring Center Receivers SCS-1R Network Enabled Receiver compatible with central station receivers that accept Standard CID, DD or DMP Serial 3 messaging SCS-VR Virtual Receiver Software only solution that runs on a server for network IP and cellular communications DMP Wireless 1100T Translator 1100X Receiver 1100XH High-Power Receiver 1100R Repeater 1103 Universal Transmitter, External Contact 1164 Wireless Smoke Detector with Synchronized Sounder 1164NS-W Wireless Smoke Detector with No Sounder 1168 Wireless Smoke/CO/Low Temp Detector 1183-135F Heat Detector 1183-135R Heat Detector 1184 Carbon Monoxide Detector Computer Software Remote Link Programming Software Dealer Admin COMPATIBILITY REFERENCE SHEET FEATURES Digital Cellular Communicators DMP.COM @DMPALARMS ▸Plug-and-play installation and activation of add-on communication modules ▸Direct reporting to any DMP monitoring center receiver with no relaying or intermediary retransmission of alarm signals ▸Power from panel with low current draw for long standby battery life ▸Fully supervised to ensure communication ▸Can be equipped with local or remote antenna ▸Check signal strength indication at the keypad ▸Supports the DMP Virtual Keypad™ app ▸XR550E provides privacy for your data with DMP encryption technology ▸XR150FC/XR550FC with 263 Series communicators have FDNY approval for network or cell primary communication ▸DMP Adaptive Technology™ switches communication paths while maintaining supervision if the current path becomes unavailable on the XR Series™ panels ▸263EXT Cellular Extension Modules extend cellular reach up to 300 feet using a single wired connection without losing dB strength ▸Access to FirstNet’s high- speed network for alarm panel communication (263LTE-FN) ▸Modular add-on to XTL, XT or XR Series™ panels ▸Direct cellular communication enables a direct path for alarm signals from the panel to the monitoring station ▸Uses digital cellular LTE data networks from AT&T or Verizon 263EXT XTLtouch XT Series XTLplus XR Series263LTE-FN © 2022 Digital Monitoring Products, Inc. | LT-1027 | 22051 CELLULAR COMMUNICATORS Specifications Primary Power 12 VDC from panel Current Draw (263LTE) Standby 14 mA Alarm 14 mA Current Draw (265LTE) Standby 13 mA Alarm 13 mA Ordering Information 263LTE-A/381-2 AT&T LTE Cellular Communicator, XT/XR Series 263LTE-A AT&T Cellular Communicator, XT Series 263LTE-FN AT&T FirstNet Cellular Communicator, XR Series 265LTE-A AT&T Cellular Communicator, XTLplus 263LTE-V Verizon LTE Cellular Communicator, XT/XR Series 263EXT Cellular Extension Modules, XT/XR Series 265LTE-V Verizon LTE Cellular Communicator, XTLplus 265LTE-V-Touch Verizon LTE Cellular Communicator, XTLtouch Accessories 381-2 18" Coax Extension 381-12 12' Coax Extension 381-25 25' Coax Extension 383 Dual Band Antenna 386 Wall Mount Antenna Bracket 387-2 2 dB Attack Enclosure Antenna 387-4 4' SMA to N Extension Cable 387-8 8' SMA to N Extension Cable 387-25 SMA TO N CABLE, 25FT, LMR195 387-50 SMA TO N CABLE, 50FT, LMR195 388-1 3 dB Fiberglass Antenna w/bracket 388-2 2 dB Attack Enclosure Antenna 388-3 3 dB MEG Antenna Certifications California State Fire Marshal (CSFM) New York City (FDNY COA #6167) Underwriters Laboratories (UL) Underwriters Laboratories Canada (ULC) For additional information, visit DMP.com and select Compliance. PRIMARY OR BACKUP PATH Configure your DMP digital cellular communicator as the primary path, providing installation flexibility and cost savings. For commercial fire applications, the 263LTE can be used as a stand-alone communicator without the need for a backup. Cellular is the right choice for locations not easily reached by phone or land lines, or where there are concerns that physical communication links might be tampered with. Your cellular communicator can also be a backup communication path, providing the security of a communication link that continues to function, even when land lines are cut or compromised. FULLY SUPERVISED You’re kept fully informed of system status. The unit sends full reporting messages including Zones, Areas and Users, with all names and details included. Full supervision ensures that the cellular communication path is intact and functional. ADAPTIVE TECHNOLOGY™ If the primary communication path is compromised or becomes unavailable, Adaptive Technology almost instantly switches to a designated backup path. Where multiple backups are available, communications can be programmed to switch to another path as necessary. The check-in frequency and programming for a backup path adapt to the check-in programming of the primary path. When the primary path becomes available, normal communications are restored. Adaptive Technology provides additional confidence in the integrity of your system, while protecting you from unexpected cellular service charges. DIRECT DATA TRANSMISSION The digital cellular communicators transmit IP data packets directly from the panel’s processor over the LTE wireless data network. All of the messages that are capable of being sent by the control panel are received directly by the DMP monitoring center receiver. There are no intermediary servers or network operation centers, and no retransmission or reinterpretation of the information. Direct reporting means faster response, with no concerns about signals not being properly relayed or intermediate communication links failing. CELLULAR SERVICE FLEXIBILITY With SecureCom Wireless™ from DMP, you have a one-stop resource for both hardware and cellular service. DMP digital cellular communicators, whether selected as original equipment in a new panel or added to an existing panel via an expansion card, are ready to use the SecureCom service. 263LTE CELLULAR COMMUNICATORS For existing XT/XR Series panels not originally configured with cellular communications, the 263 Series expansion cards let you add cellular capabilities. The 263LTE allows alarm messages to be communicated to an SCS-1R or SCS-VR Receiver over their respective HSPA+ or LTE networks. It provides a fully supervised alarm communication path over the network. The 263LTE is installed in the panel enclosure and powered by the panel so no additional enclosure, power supply or battery backup is needed. Plug-and-play installation makes upgrading your panel quick and easy. The 263LTE includes an embedded SIM card for easy activation. All modules are ready for activation with SecureCom Wireless. 263EXT CELLULAR EXTENSION MODULES The 263EXT comes with a module that installs directly on the control panel inside the enclosure. Also included is a second remote module to install with a cell modem in the attic or wherever signal strength is best. Between the two, you can have up to 300 feet of continuous reach with a CAT5 cable or 22 AWG shielded wire. The modules communicate with each other through a single wired connection, maintaining cellular signal. With DMP’s 263EXT Cellular Extension Modules, you can extend cellular reach without losing a single dB. The modules are compatible with all 263 modems and with all XT and XR Series panels. 265LTE CELLULAR COMMUNICATORS The 265LTE cellular communicators pair with XTLplus™ systems, whereas the 265LTE-V-Touch plugs into the XTLtouch™. In either case, both easily incorporate cellular communications. In the panel plastic, it requires no additional enclosures, power supplies, batteries, cabling or conduit connections. The 265LTE contains LTE technology. It includes an embedded SIM card for easy activation. All modules are ready for activation with SecureCom Wireless. 263LTE-FN FIRSTNET READY™ CELLULAR COMMUNICATOR The 263LTE-FN provides wireless communication for DMP XR and XT Series panels and is approved for use on FirstNet®, which is built with AT&T in a public-private partnership with the First Responder Network Authority. With DMP’s FirstNet Ready communicator, alarm companies have the advantage of using Band 14 – the nationwide, high-quality spectrum set aside by the federal government specifically for FirstNet. Alarm service companies qualify to use the FirstNet network by first obtaining a TMA Certificate of Verification that verifies they are in compliance with accepted Alarm Industry Standards. In addition to the TMA certification, alarm service providers must enter into a FirstNet Agreement with AT&T before they can offer FirstNet Ready alarm panels with FirstNet service. Note: If using the 263LTE-FN with the XR150/ XR550 Series, a model 381 cable is required for connection from the cell module SMA connector to the panel enclosure knockout. 800-641-4282 | DMP.com 2500 N. Partnership Blvd, Springfield, MO 65803 Designed, engineered & manufactured in Springfield, MO using U.S. & global components LIMITED WARRANTY: DMP warrants that the products manufactured by DMP and described herein shall be free from defects of manufacture, labeling, and packaging for a period of three (3) years from the invoice date to the original Buyer, provided that representative samples of the defective products are returned to DMP for inspection…To read the full DMP Limited Warranty, go to DMP.com/Warranty or check the DMP Price List or Catalog. FEATURES 630F DMP Fire Command Keypad DMP.COM @DMPALARMS ▸Simple harness connection to 4-wire keypad bus ▸At-a-glance system status ▸Powered from panel or auxiliary power supply ▸Optional backboxes for conduit or wall mount applications ▸Attractive non-obtrusive designs ▸Two-button Panic keys ▸Flush or surface mount ▸Keyswitch enables single-button operation ▸Full operation with authorized code ▸Built-in diagnostics ▸AC Power, Trouble, Alarm LED ▸Compatible with XR150/XR550TM Series ▸System events display in plain English ▸Provides 32-character full text LCD display of system events and menu prompts for efficient, easy use ▸The keypad offers simple, one-button access to silence alarms, reset sensors, test the system, and perform a fire drill 630F FIRE COMMAND KEYPAD Specifications Operating Voltage 8.5 to 15 VDC Current Draw 63 mA standby 92 mA maximum Trim Frame Dimensions 10.4" W × 7.0" H × 1.7" D Backbox Dimensions 8.75" W × 6.375" H × 2.5" D Panel Compatibility XR150 and XR550 Series Panels Keypad Accessories 635 1.75” 630F Alternate Surface Mount Backbox 635F 2.5” 630F Flush Mount Replacement Backbox 300 4-wire Replacement Harness Certifications California State Fire Marshal (CSFM) New York City (FDNY COA #6167) FCC Part 15 Underwriters Laboratories (UL) Listed ANSI/UL 864 Control Units for Fire Protective Signaling ANSI/UL 985 Household Fire Warning ULC-S559-04 Equipment for Fire Signal Receiving Centers and Systems For additional information, Go to DMP.com/Compliance. 630F REMOTE ANNUNCIATOR The 630F Fire Command Center offers a 32-character full text LCD readout that displays system events and menu prompts, making it efficient and easy to use. The backbox and trim frame provide an attractive installation. The keypad can either be flush-mounted or surface-mounted. 630F Keypad SINGLE-BUTTON OPERATION The 630F Fire Command Center has a factory-installed keyswitch that enables the four function buttons — Alarm Silence, System Reset, System Test, and Fire Drill. The user can also access these four functions and many more through the User Menu by entering a valid user code. BUILT-IN DIAGNOSTICS An internal diagnostics program lets installers and service technicians test the operation of the keypad at any time without disabling the system. SUPERVISED AND UNSUPERVISED OPERATION The 630F keypad can be programmed for supervised or unsupervised opera- tion on the keypad data bus, increasing the overall number of keypads you can install to provide maximum flexibility. When supervised, the keypad occupies its own address. Unsupervised operation allows you to install multiple keypads on the bus with the same address. STATUS LEDS The Green Power LED turns on when primary AC or DC power to the panel is at an acceptable level and flashes when its battery is low or missing. A Yellow Trouble LED turns on when either the panel has failed to communicate with the monitoring center receiver or when phone line 1 or 2 is in a bad condition. 800-641-4282 | DMP.com 2500 N. Partnership Blvd, Springfield, MO 65803 Designed, engineered & manufactured in Springfield, MO using U.S. & global components LIMITED WARRANTY: DMP warrants that the products manufactured by DMP and described herein shall be free from defects of manufacture, labeling, and packaging for a period of three (3) years from the invoice date to the original Buyer, provided that representative samples of the defective products are returned to DMP for inspection…To read the full DMP Limited Warranty, go to DMP.com/Warranty or check the DMP Price List or Catalog. © 2019 Digital Monitoring Products, Inc. | LT-0318 | 19271 DMP.COM @DMPALARMS FEATURES SPECIFICATIONS ▸Provides Class B zones for burglary and fire ▸Compatible with DMP panels that allow zone expansion ▸Suitable for mounting near protection devices ▸Connect devices using four-wire bus ▸Easily mount attractive cases on wall or three-gang box ▸Compatible with all panel zone types ▸Easy connection to four-wire keypad or LX-Bus™ ▸Proven design ensures stability and performance ▸Data LED on zone expander indicates good panel communication ▸Durable and attractive plastic or metal housing ▸Low current draw ▸Can be powered from panel or auxiliary power supply ▸Expansion using network communicators ▸Expand your DMP panel options with a wide array of expansion modules. ▸Add supervised Class B burglary zones. ▸Connect non-powered burglary or fire type devices for intrusion, glassbreak and motion detection. ▸Add 12 VDC zones for addressable two-wire smoke detectors with 715 modules. Zone Expansion Modules DMP.COM @DMPALARMS USE ON THE DMP LX-BUS The modules can be used on the LX-Bus of DMP panels. The modules connect to the four-wire bus and use only one zone address. To assign an additional zone expander, use the next available zone address. CONNECT TO KEYPAD BUS You can also use the modules as an addressed device on the keypad data bus of DMP control panels. Simply set the module to an available keypad address and connect the wiring to the appropriate screw terminals. SIMPLE ADDRESSING Address the 711S, 714, 714-8, 714-16, 715, 715-8 and 715-16 modules by setting two onboard rotary switches with a small screwdriver. The 712-8 uses slide dip switches. EASY INSTALLATION Zone expansion modules are mounted in a decorative plastic housing suitable for installing outside the panel enclosure, such as on walls or single-gang boxes. After all wiring connections are made, the covers go on to form tight-fitting protection against incidental contact or tampering. 714-8, 714-16, 715-8 and 715-16 Zone Expanders are housed in a rugged, 20-gauge, cold-rolled steel enclosure. You may also mount the 708 and 710 modules inside a DMP enclosure using the three-hole configuration and the provided standoffs. The 712-8 only mounts using the three-hole configuration and provided standoffs. ZONE PROGRAMMING Program the zone on the modules with any of the panel’s available zone types for use in burglary applications including arming type zones when used with keyswitches. The expansion zones are programmable for annunciation on DMP keypads connected to the panel. Each zone can also be individually programmed to report alarms, troubles and restorals to remote DMP SCS-1R or SCS-VR Receivers. 708 BUS EXTENDER MODULES The 708 Bus Extender Modules allow you to increase the length of wire used to run an LX-Bus or keypad bus by a maximum of 4,000 feet, while providing immunity to noise on the wires. This model comes as a pair of modules that connect between the panel and LX-Bus or keypad bus devices. Use the 708 modules for applications that include running wire over long distances, through noisy environments or where the bus is bundled with other wires, such as telephone company wire. The 708 extender can be used on all DMP panels. 708 FEATURES ▸Extends keypad bus or LX-Bus by 4,000 feet with one pair of modules ▸Connects to an auxiliary power supply for added power ▸Uses existing wire: No need to run additional wire ▸Allows twisted pair and/or shielded wire between the 708 modules 710 BUS SPLITTER/REPEATER MODULE The 710 Bus Splitter/Repeater Module allows you to expand the typical LX-Bus or keypad bus installation both in the number of devices and the length of the wire used. Each 710 module provides three bus connections up to 2,500 feet. When using multiple modules, the total distance of all circuits can be an incredible 15,000 feet! 710 As a splitter, the 710 provides superior mechanical wire connecting capability for up to three additional 12 VDC LX- Bus or keypad bus circuits. This makes the 710 module an excellent junction box when terminating multiple LX-Bus/ keypad bus runs at one location. As a repeater, the 710 module can be installed at the end of an LX-Bus or keypad bus circuit to allow an additional circuit to be added, thus increasing the total wire length. 712-8 ZONE EXPANSION MODULE Expand your system at an affordable price! You can connect non-powered burglary devices to DMP panels using the 712-8 module. It is compatible with many intrusion contacts, glassbreak detectors, motion detectors and intrusion detectors. 712-8 FEATURES ▸Eight grounded, addressable burglary zones ▸Set jumper for LX-Bus or keypad bus operation ▸Compatible with all DMP panels ▸Expand systems by connecting a second 712-8 ▸Easily address using dip switches ▸Snaps into panel enclosure using three-hole pattern ▸Separate zone 1 k End-of-Line resistors included SALES APP BUILD A SYSTEM 714/715 ZONE EXPANDERS The 714 contains four Class B burglary zones and is suitable for use with burglary and fire devices that are normally opened or normally closed. Individual zones are supervised with 1 k ohm End-of-Line (EOL) resistors and can be programmed with any burglary or fire zone type. The 715 contains four Class B powered zones and is suitable for use with 12 VDC, two-wire smoke detectors and non-powered fire or burglary devices. Individual zones on the 715 are supervised with a 3.3 k ohm EOL resistor and can be programmed with any burglary or fire zone type. OPTIONAL ACCESSORIES The standard wiring harness can be replaced with the optional 718T Plug-in Screw Terminal. The enclosure can also accommodate the 719T Terminal Boards for the 714 or the 720T Terminal Boards for the 715, which pass through the wiring of the panel’s LX-Bus. 1 k EOL resistors are included with the 719T, and 3.3 k resistors are included with the 720T. 714/715 FEATURES ▸Four protection zones on each module ▸Comes with 12-conductor wire harness ▸Optional 12-position screw terminal 714-8, 714-16, 715-8 AND 715-16 The expanders are housed in a model 340 locking metal enclosure suitable for mounting in a remote location. Each expander provides screw terminal strips for zone inputs and data bus connections, a two position jumper to designate connection to the keypad bus or the LX-Bus and an LED to indicate communication with the panel. Separate zone EOL resistors are included with each expander. 714-8/714-16 EXPANDERS The 714-8 Expander contains eight Class B zones. The 714-16 Expander contains 16 Class B zones. Both are suitable for use with normally open or normally closed burglary and fire devices. Individual zones are supervised with a 1 k ohm EOL resistor and can be programmed as any zone type. The 714-8 hardware level E is compatible with 1k - 4.7k end of line resistors, making takeovers easy. 715-8/715-16 EXPANDERS The 715-8 Expander contains eight Class B powered zones. The 715-16 Expander contains 16 Class B powered zones. Both are suitable for use with 12 VDC two- wire devices, such as smoke detectors or with non-powered fire or burglary devices. Individual zones are supervised with a 3.3 k ohm EOL resistor and can be programmed as any zone type. 714-8, 714-16, 715-8 AND 715-16 FEATURES ▸8 or 16 protection zones per expander ▸Durable metal enclosure housing with lock and key ▸Individual screw terminals accommodate 14-22-gauge wire for easy connection ▸Suitable for mounting in a remote location 711 DESCRIPTION The 711 Zone Expansion Module connects to the panel’s four-wire keypad bus or LX-Bus and is set to an address that determines the reporting zone number. The 711 provides one Class B zone for the connection of detection devices. 711 FEATURES ▸Single-zone expander ▸Rugged screw terminals accommodate 14-22-AWG wire ▸Board fits in Radionics POPIT housing ▸Easy rotary switch addressing 711S DESCRIPTION The 711S Zone Expansion Module is a flying lead style, single-zone, addressable expansion module that allows you to increase the number of reporting zones available on XT30/XT50 and XR150/ XR550 Series panels. It’s ideal for smaller applications, such as installing in a pull station back-box or even in a recessed contact hole behind the contact. The modules connect to the panel’s four-wire keypad bus or LX-Bus and are set to an address that determines the reporting zone number. The 711S provides one Type A Class B zone. 714N-POE The 714N-POE Network Zone Expander allows you to add four zones to the XR150/XR550 Series panels using IP network capability. Individual zones are compatible with 1 k-10 k resistors, giving a wide variety for takeovers. POE compatibility provides power for the expander and provides 12 V output for powered zones such as PIRs or glassbreaks. Using AES encryption to talk to the panel provides the next level of protection to the expander. SPECIFICATIONS ZONE EXPANSION MODULES ZONE EXPANSION MODULE COMPARISON CHART Refer to the chart below for a comparison of the features for each DMP zone expansion module. Module Address Number of Zones 3-Hole Plastic Case Operating Voltage Compatible Panels 708 N/A N/A Yes Yes 12 VDC All DMP 710 N/A N/A Yes Yes 12 VDC 712-8 Dip Switch 8 Yes No 12 VDC XT Series and XR Series 711 Rotary 1 No Yes 12 VDC 711S Rotary 1 No No 12 VDC 714 Rotary 4 Class B No Yes 12 VDC 714-8 Rotary 8 Class B No Metal Enclosure 12 VDC 714-16 Rotary 16 Class B No Metal Enclosure 12 VDC 715 Rotary 4 Class B No Yes 12 VDC 715-8 Rotary 8 Class B No Metal Enclosure 12 VDC 715-16 Rotary 16 Class B No Metal Enclosure 12 VDC 714N-POE 4 No Yes 12 VDC or POE XR Series 708 (Non-UL) Bus Extender ModuleOperating Voltage 8.8 to 15.0 VDCOperating Current 20 mA per pairDimensions 4.5" W × 2.75" H × 1.75" DMaximum Distance 4,000 feet between the two 708 modules 710 Bus Splitter/Repeater Module Operating Voltage 8.8 to 15.0 VDC Operating Current 30 mA Dimensions 4.5" W × 2.75" H × 1.75" D Distance 2,500 feet (one module), 15,000 feet maximum 711 Zone Expansion ModuleOperating Voltage 8.8 to 15.0 VDCOperating Current Average 11 mA + 1.6 mA per active zone Alarm 11 mA + 2 mA per zone in alarmZone Voltage 5 VDC (1.6 mA across EOL)Dimensions 4.5" W × 2.75" H × 1.75" D 711S Zone Expansion Module Operating Voltage 8.8 to 15.0 VDC Operating Current Standby 4.2 mA Alarm 4.7 mA Zone Voltage 5 VDC, max 2 mA Dimensions 1.25" W × 2.75" H 712-8 Zone Expansion ModuleOperating Voltage 8.8 to 15.0 VDCCurrent Draw 17 mA + 1.6 mA per active zone 17 mA + 2 mA per zone in alarm Dimensions 4.5" H × 2.5" W 714/715 Zone Expansion ModuleOperating Voltage 8.8 to 15.0 VDCOperating Current714 Average 7 mA + 1.6 mA per zone Alarm 7 mA + 2 mA per zone 715 Average 7 mA + 4 mA per zone + 0.1 per 2-wire smoke Alarm 7 mA + 58 mA per shorted zone + 0.1 per 2-wire smoke + 30 mA per smoke in alarmDimensions 4.5" W × 2.75" H × 1.75" D 714-8, 714-16, 715-8 and 715-16 Zone Expansion Operating Voltage 8.8 to 15.0 VDC Operating Current 714-8/16 Average 20 mA + 1.6 mA per zone Alarm 20 mA + 2 mA per zone 715-8/16 Average 20 mA + 4 mA per zone + 0.1 per 2-wire smoke Alarm 20 mA + 58 mA per shorted zone + 0.1 per 2-wire smoke 30 mA per smoke in alarm Enclosure 20-gauge cold-rolled steel Dimensions 12.5" W × 11.5" H × 3.5" D 714-8/-16 Color Gray 715-8/-16 Color Red 714N-POE Network Zone Expansion Module Primary Power 8.5 VDC to 28.5 VDC Current Draw Standby 7.5 mA at 12 VDC Alarm 7.5 mA at 12 VDC Output Voltage(POE) 12 VDC Max. Power Draw 12.95W Available Output Current 750 mA Zone Volage 5 VDC, max 2 mA Dimensions 4.5" W × 2.75" H × 1.75" D CertificationsRefer to the appropriate panel programmingand installation guides for specific compliance listings for installation and programming requirements necessary to meet aparticular approval. California State Fire Marshall(CSFM) New York City (FDNY COA #6167) (711, 714,715 only) Underwriters Laboratories (UL) Listed For additional information go toDMP.Com/Compliance. 800-641-4282 | DMP.com 2500 N. Partnership Blvd, Springfield, MO 65803 Designed, engineered & manufactured in Springfield, MO using U.S. & global components LIMITED WARRANTY: DMP warrants that the products manufactured by DMP and described herein shall be free from defects of manufacture, labeling, and packaging for a period of three (3) years from the invoice date to the original Buyer, provided that representative samples of the defective products are returned to DMP for inspection…To read the full DMP Limited Warranty, go to DMP.com/Warranty or check the DMP Price List or Catalog. © 2020 Digital Monitoring Products, Inc. | LT-0232 | 20153 LISTING No.:7165-1157:0135 CATEGORY:7165 - FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE:Digital Monitoring Products, Inc. 2500 N. Partnership Blvd, Springfield, MO, 65803 Contact: Bade,Amy (417) 831-9362 (417) 447-9698 Email: abade@dmp.com DESIGN: Models XR150, XR350, and XR550 combination fire and burglary alarm control units. Local, remote station, proprietary and central station services. Models may have a combination of the following suffixes: D (dialer), N (network), E (encryption) or FC (fire control). Refer to listee's data sheet for additional detailed product description and operational considerations. System components: XR150, XR350, XR550: Main Board 341, 349, 350, 350A, 352P 352X: Enclosures 352S: Battery Enclosure 630F: Supervised LCD Keypad 7070, 7070A, 7073, 7073A, 7170, 7170A, 7173, 7173A, 7570, 7570A, 7573, 7573A: LCD Keypads 325: Transformer Bracket 322, 323, 324, 324P, 327: Transformers 711, 714, 714-8, 714-16, 715, 715-8, 715-16: Zone Expanders 711S: Zone Expander (NOT for use with XR350) 716: Output Expander 717: Annunciator Module 860: Relay Module 893A: Dual Phone Line Module 734, 734N: Wiegand Interface 710: Bus Splitter 270: Network Transient Suppression Module 277: Trouble Sounder 9060, 9063: Wireless Keypads 263C, 263H: Cellular Communicator (May be used as the standalone primary communicator) 263LTE, *263LTE-FN: Cellular Communicator (NOT for use with XR350) (May be used as the standalone primary communicator) Page 1 of 2 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING & INVESTIGATIONS DIVISION BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 865, 866, 867: Indicating Module 869: Initiating Module 303: Reset/Silence Switch 1100X, 1100XH: RF Wireless Receiver 1100R: Wireless Repeater 1103: Wireless Transmitter 1135: Wireless Siren RATING: 120 VAC, 0.5 A, 60 Hz INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, rating, and UL label. APPROVAL: Listed as combination fire and burglary alarm control units for use with separately listed electrically compatible initiating and indicating devices. Refer to listee's Installation Instructions Manual for details. NOTES: 1. The Fire Alarm Verification Feature (delay of fire alarm signal), the maximum Retard/Reset/Restart period shall not exceed 30 seconds. 2. Burglary and other non-fire functions were not examined. This listing is based upon technical data submitted by the applicant. OSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: 03/17/2023 Listing Expires: 06/30/2024 Authorized By: David Castillo, Program Coordinator Fire Engineering & Investigations Division *Revision 4-12-21 VWW Page 2 of 2 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING & INVESTIGATIONS DIVISION BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE FEATURES 2W-BLX/2WT-BLX Addressable Smoke Detector ▸Addressable single-point detector module ▸Fixed-temperature thermal detector trips at 135° F ▸Built-in drift compensation ensures reliable sensing ▸LED lights speed installation and confirm status ▸Reduced wiring and multiple mounting options speed installation ▸State-of-the-art optical sensing chamber and as advanced microprocessor ▸Easy rotary switch addressing ▸Proven design ensures stability and performance ▸Reduced wiring speeds installation time ▸ Emergency responders know where to go first ▸Trouble alerts to a specific detector ▸Built-in single zone ▸Addressable module for DMP LX-BusTM connection ▸The 2WT-BLX also includes an integrated heat sensor ▸Red LED blinks once every five seconds to indicate maintenance required 2W-BLX AND 2WT-BLX Specifications Operating Voltage 12 VDC Dimensions 5.3" Dia. × 2.0" Weigh 6.3 oz Standby Current 11 mA Alarm Current 31 mA Maximum Ripple 30% (V) peak to peak Operating Temperature (Ambient Room) 2W-BLX 32° F to 120° F 2WT-BLX 32° F to 100° F Humidity Range 0 to 95% RH non-condensing Heat Sensor 135° F (2WT-BLX Only) Power-Up Time 45 seconds Photoelectric Sensitivity 1 - 4%/ft. Compatibility XR150/XR550 Series Panels Ordering Information • 2W-BLX/10 Photoelectric smoke detector • 2WT-BLX/10 Photoelectric smoke detector with fixed-temperature thermal detector Certifications California State Fire Marshal (CSFM) Underwriters Laboratories (UL) Listed UL 268 Smoke-Automatic Fire Detectors For additional information, go to DMP.com/Compliance. SINGLE-POINT ADDRESSABLE TECHNOLOGY A factory-mounted, addressable single- point zone expander is integrated into the base of the smoke detector. Because each detector reports individually to the panel, trouble reports are identified to a specific detector, speeding repair. No need to replace the heads on a string of detectors or individually test each detector to pinpoint the source of the problem. In an alarm situation, facility owners and first responders instantly know the exact location of the alarm, enabling a faster response. For any installation that includes multiple rooms or areas, addressable technology offers many benefits. SIMPLIFIED TROUBLESHOOTING Addressable detectors provide trouble signals traceable back to a separate detector. This further simplifies troubleshooting and speeds repairs. FIXED TEMPERATURE THERMAL DETECTOR The 2WT-BLX features a restorable, built-in, fixed temperature thermal detector and is capable of sensing a temperature higher than 135° F. If the detector senses a higher temperature than 135°, the red LED latches on, and an alarm condition is sent to the control panel. BUILT-IN DRIFT COMPENSATION As detectors age and accumulate contaminants or as their environment changes, false alarms become more common. With drift compensation, the detector automatically adjusts to maintain the UL-acceptable operating range. Smoothing algorithms compensate for these changes, reducing nuisance alarms. LED STATUS LIGHTS Wide-angle, dual-color LEDs provide at- a-glance status indications. After power- up has completed and the detector is functioning normally, the green LED blinks once every five seconds. If the detector needs maintenance because its sensitivity has shifted outside the limits, the red LED blinks once every five seconds. COMMUNICATION VERIFICATION The verification feature speeds installation and ensures system integrity by verifying the wiring and confirming device polling using a two-second flashing green LED on the integrated zone expander. SIMPLIFIED WIRING Compared to non-addressable devices, addressable detectors require much simpler wiring. This type of wiring reduces both installation time and the chance of errors. MOUNTING OPTIONS Multiple options provide installation flexibility. Each detector is supplied with a mounting base that can be mounted: ▸a single gang box ▸a 3½ - or 4-inch octagonal box ▸a 4-inch square box with plaster ring ▸directly to the ceiling using drywall fasteners The bases can be pre-wired so the heads can be quickly inserted to complete the installation. TAMPER RESISTANT The detectors include a tamper- resistant feature that prevents removal from the mounting base without the use of a tool. EASY ADDRESSING Setting the address is as easy as rotating the two onboard rotary switches to positions matching the LX- Bus zone number address. 800-641-4282 | DMP.com 2500 N. Partnership Blvd, Springfield, MO 65803 Designed, engineered & manufactured in Springfield, MO using U.S. & global components LIMITED WARRANTY: DMP warrants that the products manufactured by DMP and described herein shall be free from defects of manufacture, labeling, and packaging for a period of three (3) years from the invoice date to the original Buyer, provided that representative samples of the defective products are returned to DMP for inspection…To read the full DMP Limited Warranty, go to DMP.com/Warranty or check the DMP Price List or Catalog. © 2022 Digital Monitoring Products, Inc. | LT-1370 | 22351 GREEN LED RED LED Power-up Blinks 10 seconds Blinks 10 seconds Normal (Standby)Blinks 5 seconds -- Out of sensitivity --Blinks 5 seconds Alarm --Solid LISTING No.:7272-1157:0137 CATEGORY:7272 - SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC LISTEE:Digital Monitoring Products, Inc. 2500 N. Partnership Blvd, Springfield, MO, 65803 Contact: Wilson, James 417-447-9697 Email: jwilson@dmp.com DESIGN: Models 2W-BLX and 2WT-BLX two wire, addressable, photoelectric smoke detectors. Model 2WT-BLX employs a supplemental heat sensor for use only to assist the smoke detector. This thermal circuitry is NOT approved for use in lieu of required heat detectors. Refer to listee's data sheet for additional detailed product description and operational considerations and listee’s installation instructions for details. RATING: 12 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed a photoelectric smoke detectors for use with listee's separately listed Models XR150, XR350, and XR550 (CSFM No. *7165-1157:0134 and 7165-1157:0135 ) or Models XR500, XR500N, XR500E, XR100 and XR100N (CSFM No. 7165-1157:0123 and *7165-1157:0127) fire alarm control units. Refer to listee’s Installation Instruction Manual for details. NOTES: The photoelectric type detectors are generally more effective at detecting slow, smoldering fires, which smolder for hours before bursting into flames. Sources of these fires may include cigarettes burning in couches or bedding. The ionization type detectors are generally more effective at detecting fast, flaming fires, which consume combustible materials rapidly and spread quickly. Sources of these fires may include paper burning in a waste container or a grease fire in the kitchen. This listing is based upon technical data submitted by the applicant. OSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. *Rev 06-11--14 gt Page 1 of 2 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING & INVESTIGATIONS DIVISION BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE Date Issued: 03/17/2023 Listing Expires: 06/30/2024 Authorized By: David Castillo, Program Coordinator Fire Engineering & Investigations Division Page 2 of 2 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING & INVESTIGATIONS DIVISION BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE Space Age Electronics, Inc. www.1sae.com800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax • Installed with a 4 gig digital drive with USB B connector • 2 Key ring hooks to hold system keys • Business card holder for key contacts • Overall Dimensions are 12” x 13” tall and 2 ¼ deep • 16 gauge steel box and cover for security • Durable powercoat baked on other colors available • Standard ¾”cat 30 key lock other lock as- semblies available • Solid stainless steel piano hinge • Permanently screened white ink 1” high “Fire Alarm Documents” • Legend sheet for passwords and system information Standard Features: Space Age Electronics, Inc. 2009 ED0549 LT10559 Rev.D 1/2 FIRE ALARM DOCUMENTS The FAD is the perfect fit to meet the demanding code requirements today. SAE's number one goal is to manufacture code compliant solutions and this product allows you to do just that. NFPA 72 2007 section 6.2.2.1 states, "A record of installed software and firmware version numbers shall be maintained at the location of the fire alarm control unit." This durable 16 gauge steel enclosure with a solid piano hinge and key lock will keep all of your code required documents in one safe place. With a 4GB USB flash drive it stores your fire alarm software safe and secure eliminating the occurrences of the soft- ware not being on site when technicians arrive to service the system. Along with your fire alarm soft- ware you can store your test & inspection docu- ments, service records, manuals & AS built drawings for the system. Using a standard USB B connector it allows you to plug in with any standard SB printer cable to upload or download information. The FDB is designed to hold critical manuals and documents with a durable steel retainer. It has designated hooks to organize key rings and hold important business cards for easy access and reference. Inside the cover it has a organized note table that allows for documentation for passwords and other critical system information. FAD NFMEMBERPA® Made In U.S.A. ACE-11 Space Age Electronics, Inc. 2008 ED0549 LT10559 Rev.D 2/2 Space Age Electronics, Inc.www.1sae.com800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax Ordering Information: Part # Description SSU00685 Fire Alarm Storage Cabinet RED SSU00686 Custom screening with your Logo solutions (IAMEFAD) This document is subject to change without notice, see doc # ED0479 for legal disclaimer The fire alarm documents box (FAD) shall be UL Listed, constructed of 18 gauge cold rolled steel. It shall have a red powder coat epoxy finish. The cover shall be permanently screened with 1" high lettering "FIRE ALARM DOCUMENTS " with white indelible ink. The access door shall be locked with a 3/4" barrel lock and the hinge shall be a solid width 12" stainless steel piano hinge. The enclosure will supply 4 mounting holes. Inside the enclosure will accommodate standard 8 1/2 x 11 manuals and loose document records that will be protected within the enclosure. A legend sheet will be permanently attached to the door for system required documentation, key contacts and system information. The FAD will have securely mounted inside a minimum of 4 Gigabyte digital flash memory drive with a standard USB B connector for uploading and downloading information. The drive shall not be accessible without tools to any person whom gains access to the records. The enclosure shall also provide 2 key ring holders with a location to mount standard business type cards for key contact personnel. Legend sheet for storing system information including contacts, sign-o , maintenance & test information, and alternate locations of additional records. Business Card Holder Key Ring Hooks USB Storage InterfaceRequires Standard USB-BConnector Space Age Electronics, Inc. 58 Chocksett Road Sterling, MA 01564 800-486-1723 www.1sae.com For replacement forms order P/N: EA0316 (Qty. 10) LT10644 Rev. 1 Minimum Required Documentation (SIG-FUN) (Reference NFPA-72 2013 Section 7.2.1)1 Written narrative providing intent and system description □ N/A □ Enclosed Or Alt. Location _____________________________________________ 2 Riser diagram □ N/A □ Enclosed Or Alt. Location _____________________________________________ 3 Floor plan layout showing location of all devices and control equipment □ N/A □ Enclosed Or Alt. Location _____________________________________________ 4 Sequence of operation in either an input/ output matrix or narrative form □ N/A □ Enclosed Or Alt. Location _____________________________________________ 5 Equipment technical data sheets □ N/A □ Enclosed Or Alt. Location _____________________________________________ 6 Manufacturers published instructions, including operation and maintenance instruction □ N/A □ Enclosed Or Alt. Location _____________________________________________ 7 Battery calculations (where batteries are provided) □ N/A □ Enclosed Or Alt. Location _____________________________________________ 8 Voltage drop calculations for notification appliance circuits □ N/A □ Enclosed Or Alt. Location _____________________________________________ 9 Completed record of inspection and testing in accordance with 7.6.6 and 7.8.2 □ N/A □ Enclosed Or Alt. Location _____________________________________________ 10 Completed record of completion in accordance with 7.5.6 and 7.8.2 □ N/A □ Enclosed Or Alt. Location _____________________________________________ 11 Copy of site specific software, where applicable □ N/A □ Enclosed Or Alt. Location _____________________________________________ 12 Record (as-built) drawings □ N/A □ Enclosed Or Alt. Location _____________________________________________ 13 Periodic inspection, testing, and maintenance documentation in accordance with Section 7.6 □ N/A □ Enclosed Or Alt. Location _____________________________________________ 14 Records, record retention, and record maintenance in accordance with 7.7 □ N/A □ Enclosed Or Alt. Location _____________________________________________ Signed:_______________________ Date: ____ / ____ / ____ Property Information Name of property: ________________________ Address: ________________________________Description of property:_____________________Occupancy type:__________________________ Certifications and Approvals16.1 System Installation Contractor:This system, as specified herein, has been installed and tested according to all NFPA standards cited herein. Signed:_______________________ Printed name:__________________ Date: ____ / ____ / ____Organization:__________________ Title:_________________________ Phone: _______________________ 16.5 Authority Having Jurisdiction:I have witnessed a satisfactory acceptance test of this system and find it to be installed and operating properlyin accordance with its approved plans and specifications, with its approved sequence of operations, and with allNFPA standards cited herein. Signed:_______________________ Printed name:__________________ Date: ____ / ____ / ____Organization:__________________ Title:_________________________ Phone: _______________________ Equipment Information ID No 1: ________________________Serial: __________________________Access code:_____________________ ID No 2: ________________________Serial: __________________________ Access code:_____________________ LISTING No.:7300-0553:0110 CATEGORY:7300 - FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE:SPACE AGE ELECTRONICS 58 Chockett Road, Sterling, MA, 01564 Contact: Scholl, Robert (508) 485-0966 (508) 485-4740 Email: bob.scholl@1sae.com DESIGN: Models TC2-32, TC1-18, TCX/A 64, TCX/D 128, ACE/A, AC2, ACE/D, IF-2, IF1, IFX/A and IFX/D enclosures. Models ACE-11, ACE-12 and ACE-13, *ACE2424, *ACE 3036, *ACE 2436, *ACE 3048 document cabinets. Refer to listee's data sheet for detailed product description and operational considerations. RATING: INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number and UL label. APPROVAL: Listed as fire alarm equipment enclosures and document cabinets for use with listee's fire alarm equipment. Refer to listee’s Installation Instruction Manual for details. NOTES: This listing is based upon technical data submitted by the applicant. OSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: 03/22/2023 Listing Expires: 06/30/2024 Authorized By: Victor Wong, Program Coordinator Fire Engineering & Investigations Division 02-09-16 dc Page 1 of 1 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING & INVESTIGATIONS DIVISION BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE